Overview

The Disio Display thermostat is designed to be used as a single thermostat for several applications.

The Disio Display thermostat was designed as a fancoil controller/thermostat solution and can be configured for a number of 2 pipe and 4 pipe fancoil sequences, however due to the number and flexibility of universal inputs and outputs can also be used for pressure dependent terminal unit applications or control of standalone heaters (baseboard, unit heater, or radiant panels).

The Disio Display thermostat can act as a stand-alone thermostat to control any one of the mentioned applications or can connect over BACnet MS/TP to be controlled from a building management system (BMS).

Features

  • 7 Segment Display
  • Capacitive touch buttons
  • Menu button for basic information
  • Gesture Presence Sensing
  • 24VAC power terminal blocks for power
  • [4] Universal Inputs (configurable)
  • [4] Universal Outputs (configurable)
  • Temperature Sensing
  • USB-C port for Service Tool
  • BACnet MS/TP compatible (terminal blocks)
  • Switched HOT/COM Jumper

Disio Airflow Kit

Overview

The Disio Airflow Kit was designed to introduce precise airflow monitoring and control to maintain optimal comfort in a space.

When added to the Disio Display Thermostat, the Disio Airflow Module will output a 0.25-4 VDC (0-2” W.C.) signal proportional to the differential pressure measured at the inlet, enabling control of flow sensing VAV diffusers, pressure-independent terminals, and airflow monitoring applications.

Features

  • Diagnostic light
  • 0.25-4 VDC (0-2” W.C.) output signal
  • User calibration
  • 24VAC power terminal block